LAMAX WatchY2, User Manual

Page: 13 / 65

11
Back to contents
5. Further Features of the LAMAX WatchY2
1) SOS button
The physical „SOS button“ (see section LAMAX WatchY2 Controls ) ) is primarily intended
for dialling a stored SOS contact and sending an SOS notification to the LAMAX Tracking
application when a threat is felt.
The SOS function is activated by pressing and holding the „SOS button“ for 5 seconds. If two
SOS contacts are entered, and the device cannot get through to the first number entered, it
will automatically call the second. Before dialling, a notification will also be sent to the LAMAX
Tracking mobile application.
Note: To dial an SOS contact, at least one number must be entered in: (Menu → Current
device settings
→
Default SOS contacts) .
2) Monitored areas
In the LAMAX Tracking application it is possible to set „Monitored areas“ (Menu
→
Device
Geofence) . After visiting or leaving the set monitored area, the user of the application will
receive a notification about this event. For more information on setting this function, refer to
the LAMAX Tracking instructions.
3) Alarm clock
The device has an „Alarm clock“ function, the settings of which can be found in the LAMAX
Tracking mobile application (Menu → Current device settings → Alarm clock) .
4) Do not disturb / school mode
By activating the „Do not disturb / school mode“ in the LAMAX Tracking application (Menu →
Current device settings
→
Do not disturb) , the functionality of the device is reduced at set
time intervals (e.g.: teaching time/after-school activities) to just the clock display and using
the „SOS button“. The device cannot be called. When this mode is turned on, the icon
appears on the LAMAX WatchY2 screen. This feature can be turned off at any time by deleting
time intervals.
5) Finding the device
With the „Find device“ feature, you can easily locate a device you cannot find. After activating
this function in the LAMAX Tracking mobile application (Menu → Current device settings →
Find a Watch) , the device will start ringing and will display the text “Here I am
☺
“.