LAMAX
DRIVE C5
Dual
The rear-view mirror car camera
LAMAX
DRIVE C5
Dual
The rear-view mirror car camera
2) Sound On/Off
While in video mode press Down to turn off the audio whilst recording. Pressing the button
again switches the audio back on.
3) Fast forward
Press Down button in record mode to fast forward.
4) Rear-view camera display
Press the Down button in standby mode to turn the rear-view camera display on or off.
8. OK
1) Recording
To record press the OK button in Video mode. Pressing the button again will stop the
recording.
2) Taking a photo
Press the OK button in Photo mode to take a photo.
3) Playing video
Press the OK button in Playback mode to start video playback.
4) Confirmation
Press OK in the Video/Photo/Playback modes to enter the Settings menu. Press Up and
Down to navigate through the menu and press OK to confirm your selected option.
5) Full screen
Press and hold OK in the Video/Photo/Playback modes to switch between full screen and
standard view.
Installation instructions
1. Turn off your vehicle engine.
2. Insert the memory card into the slot.
Note:
Only use cards with a high transfer speed (higher than class 6). The card capacity
should be no less than 512 megabytes and no more than 32 gigabytes.
3. Attach the device to the interior rear-view mirror of the car.
4. Insert the car charger into the car cigarette lighter.
5. Connect the car charger to the USB socket on the device.
Note:
Fasten the car charger cable around the windscreen of the car.
6. Install the rear-view camera on the rear window to cover the area behind the vehicle. Place
the cable along the chassis of the car. After completing the installation, connect the cable
to the back of the camera.
7. Set the lens so that it faces parallel to the ground.
