background image

A39 UNIVERSAL SCR CHARGER INSTRUCTION MANUAL

Page 3 of 8

RECEIVING INSTRUCTIONS

AND

GENERAL EQUIPMENT INFORMATION

CAUTION:  To ensure safe installation and operation, the information given in

the instruction manual should be read and understood before installing or

using the equipment.

RECEIVING INSTRUCTIONS

Unpacking and Inspection: Examine the shipping crate upon arrival.  If there is obvious damage, describe

on the receiving documents.  Within a few days after delivery, the equipment should be uncrated and

carefully inspected for hidden damages.  When removing packaging material, be careful not to discard

any equipment, parts, or manuals.  If any damage is detected you should:

1.

 

File a claim with the carrier within five (5) days.

2.

 

Send a copy of the claim to La Marche Mfg. Co.

3.

 

Call La Marche Mfg. For a RETURN MATERIAL AUTHORIZATION NUMBER.

Failure to properly file a claim for shipping damages, or provide a copy of the claim to La

Marche Mfg., may void warranty service for any physical damages reported for repair.

HANDLING
WARNING:  Equipment can be very heavy, and top-heavy.  Use adequate manpower or

equipment for handling.  Until the equipment is securely mounted, care must be used to

prevent the equipment from being accidentally tipped over.

NOMENCLATURE PLATES

Each piece of La Marche Mfg. Equipment shipped is identified by part number on the nomenclature plate.

ADJUSTMENTS

All equipment is shipped from the factory fully checked and adjusted.  Do not make any adjustments

unless the equipment has been powered-up and the settings have been determined to be incorrect.

SPARE PARTS

To minimize downtime during installation or normal service, it is advisable to purchase spare fuses, circuit

boards and other recommended components.  Please refer to the list of recommended spare parts and

their La Marche Mfg. Part numbers included with the instruction manual.  It is recommended that spare

fuses be ordered for all systems.

To order spare parts, please contact La Marche Mfg. (847)-299-1188 during business hours and ask for

the Parts Department.

Summary of Contents for A39









Reviews: