LSI-008 Rev B
Page 3 of 3
(D) Alternator contactor connection
(C) Cable plug
(B) Alternator cable connection
(E) AC2101 base screws
(F) Ground wire lug
(A) AC2101 label (back side)
Page 1: ...nits Part Number MC01 XXXXX any model of the MC01 containing AC2101 modules falling between the serial numbers 195601 to 205400 REASON To prevent the occurance of alternator field circuit breaker tripping during engine start DESCRIPTION The following instructions detail the procedure to remove and install the AC2101 Alternator Control Unit on the MC01 PARTS REQUIRED Part No Description Qty AC2101 ...
Page 2: ...nut and washer securuing the AC2101 bus bar to the alternator contactor D 6 Loosen and remove the two screws securing the AC2101 to the base E 7 Remove the AC2101 from the MCU 8 Install new AC2101 revision I C 4 or above over the alternator contactor post and onto MCU base 9 Install two screws to secure AC2101 to base E Assure that ground wire lug is under one screw F Tighten screws to 12 in lb 10...
Page 3: ...LSI 008 Rev B Page 3 of 3 D Alternator contactor connection C Cable plug B Alternator cable connection E AC2101 base screws F Ground wire lug A AC2101 label back side ...
