11
8. Immediate Action Card
1.
CUT THE PAINTER LINE AND GET CLEAR OF THE VESSEL
2.
CHECK RAFT FOR PROPER INFLATION. RAFT TUBE SHOULD BE FIRM
3.
LOOK FOR AND PICK UP OTHER SURVIVORS
4.
PICK UP ANY FLOATING EQUIPMENT
5.
ENSURE SEA-ANCHOR STREAMED WHEN CLEAR OF VESSEL
6.
SIT LOW ON THE FLOOR WITH YOUR BACK TOWARDS THE TUBE
7.
BAIL OUT ANY WATER THAT HAS ENTERED THE RAFT
8.
ACTIVATE ANY EMERGENCY RADIO BEACONS, IF AVAILABLE
9.
SET-UP CANOPY (IF EQUIPPED)
10.
CLOSE UP ENTRANCE
11.
MAKE A CALM ESTIMATION OF YOUR SITUATION
12.
KEEP CALM. DO NOT MOVE UNLESS NECESSARY
Important Note:
Make sure that all the parts of the liferaft are inflated. If the tube of
the liferaft is deflated, you should restore the pressure by using the pump of the standard
equipment of the liferaft. The pressure relief valve is usually located inside the liferaft. If
there is a leak of the inflation gas, the raft must be ventilated using the canopy opening.
Water:
Eliminate the water that had entered the liferaft using the bailer of the standard
equipment of the liferaft
Summary of Contents for 72200
Page 1: ...www lalizas com INFLATABLE LIFERAFT OWNER S MANUAL LOG BOOK ...
Page 2: ...2 ...
Page 15: ...15 ...
