
6
INSTRUCTIONS FOR USE
1. Plug into the socket and switch on. The red POWER
light will illuminate when plugged in to show the No
Mess Waffle Maker is switched on and heating up.
After a few minutes, the green READY light will come on
and illuminate, to show the hotplates have heated up to
temperature and the appliance is ready to use.
Always ensure the READY light has come on, otherwise
your food may stick and not cook through properly.
The No Mess Waffle Maker has one temperature setting. The READY light may go off for
a while as the appliance has lost heat whilst the batter has been added or the temperate
has changed. This is normal and will come back on once the appliance is back up to
temperature.
2. Lift the lid carefully by the lid handle and spray both the hotplates with a little spray oil.
You can also brush the hotplates with oil before or after switching on the No Mess
Waffle Maker. If brushing oil onto the heated hotplates, use a heat resistant silicone
basting or pastry brush.Take care, the hotplates are hot and oil may spit.
3. Pour your batter onto the lower hotplate and close the lid to cook. The No Mess
Waffle Maker is designed to accommodate a certain amount of overflow into the edges
surrounding the hotplates. Use no more than 1½ cups of batter per batch of 4
waffles in order to avoid overflow coming from the appliance. The batter should be
level with the top of the raised parts. The lower hotplate is divided into four quarters
for individual waffles. You may divide your batter between the four quarters depending
on how many waffles you wish to make.
USING YOUR NO MESS WAFFLE MAKER
FOR THE FIRST TIME
• Unpack the No Mess Waffle Maker, remove all the packaging materials.
• To release the lid, place your thumb under the lid handle and press the safety catch to
release.
• Wipe the hotplates with a damp soapy cloth, then wipe with a clean damp cloth and
dry thoroughly.
• When you switch on the No Mess Waffle Maker for the first time there may be a slight
burning smell. This is normal for a new product and will disappear after a few uses.
Power light
Ready light