manualshive.com logo in svg

Lakeside 000010, Assembly & Use Instructions

Share
Download
Lakeside 000010 Assembly & Use Instructions Download Page 8

Shore Ramp DIY Kit     p/n: 000010 rev A 

8 

doc: 400010 copyright© 2022 Lakeside Recreation, LLC 

Parts List 

Part Number 

Qty 

Description 

100001 

16 

Wheel, 5 x 2 Polyolefin 

100002 

1 

Which with Strap 

700004 

8 

Bent Aluminum Axle 

700005 

1 

5/8” Roller Shaft, Galvanized 

730007 

1 

10” Keel Roller  

700003 

1 

Roller End Plate, Galvanized 

700002 

1 

Strut Mount Plate, Galvanized 

700001 

1 

Lateral Plate, Galvanized 

 

1 

Bolt Bag Containing: 

730001 

16 

    3/8-16 x 2.50” Galvanized Bolt 

730002 

6 

    3/8-16 x 4.00” Galvanized Bolt 

730004 

22 

    3/8-16 Galvanized Nut 

730003 

24 

    3/8 Galvanized Washer 

730006 

16 

    3/4" Nylon Washer 

730005 

2 

    5/8” Shaft Spacer 

300001 

16 

    Cotter Pins 

400010 

1 

Instructions for Shore Ramp DIY Kit, Printed 

400011 

1 

Label for Box for Shore Ramp DIY Kit, Printed 

710001 

1 

Shipping Box Shore Ramp DIY Kit 

 
One Year Limited Warranty 

LAKESIDE RECREATION products are warranted to be free from defects in materials or workmanship for one (1) year from the date 
of purchase. Within this period we will provide a replacement for any component that fails in normal use. Such replacement will be 
made at no charge to you, provided that you shall be responsible for any shipping charges and labor for replacement of the component.  
Replacement products or components may be new or refurbished at the sole discretion of LAKESIDE RECREATION. 

This warranty does not apply to: (a) cosmetic condition, such as (but not limited to) scratches, markings, discoloration, nicks, dirt, oil, 
stains, surface corrosion, and dents; (b) damage or loss caused by accident, abuse, misuse, or other acts of nature or external causes; 
(c) damage or failure due to improper assembly, improper installation, overloading beyond rated capacity, or use for purposes not 
intended; (d) damage to a product resulting from modification or alteration.  Determination of defects in material or workmanship 
which are covered under this warranty shall be at the sole discretion of LAKESIDE RECREATION. 

To make a warranty claim, contact LAKESIDE RECREATION via the warranty claim link on 

www.lakesiderecreation.com

 and 

provide a description of the failed component and your contact and shipping information.  LAKESIDE RECREATION at its sole 
discretion may require photographic documentation of the failed component; require the failed component to be returned for 
inspection; and/or require the failed component to be returned in exchange for the replacement component.  Returned components 
shall be become the property of LAKESIDE RECREATION when a replacement component is provided.  Please do not return any 
products or components without prior authorization.  LAKESIDE RECREATION shall not be responsible for any shipping charges 
for any component or product returned to us, nor for any shipping charges to return back to you any component or product.   

THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHER 
WARRANTIES EXPRESS, IMPLIED, OR STATUTORY, INCLUDING ANY LIABILITY ARISING UNDER ANY WARRANTY 
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, STATUTORY OR OTHERWISE.  Subject to 
applicable law, in no event shall our liability exceed the purchase price of the product. 

 

Summary of Contents for 000010









Reviews:

No comments

Brands by name

Popular brands

Load more brands