For Best Results
• Do not place more than one document inside a pouch, as this can cause
poor lamination or jamming. (Pouches are available in several sizes to
accommodate smaller documents.)
• Use a thicker pouch (5 mils or above) for thin materials such as newsprint
or glossy paper.
• Place documents as close as possible to the closed end of the pouch.
Service
Do not attempt to service or repair the laminating machine yourself. If you
have any problems, contact customer service at (800) 428-4414.
Specifications
Electrical:
120V/60Hz/3.1A
Dimensions:
17.7" x 7.2" x 4.25"
(450 x 183 x 108 mm)
Weight:
8.8 lbs. (4.0 kg)
Maximum pouch width:
13 inches (330 mm)
Pouch thickness:
3 to 8 mils (80 to 200 microns)
Warm-up time:
8 to 16 minutes
Troubleshooting Guide
Problem
Solutions
Machine won’t operate;
• Check the plug to make sure it is fully
no lights are on.
inserted into the electrical outlet.
Documents are jamming or
• Make sure pouches are the correct
do not exit from the machine.
thickness (3 mils to 8 mils).
• Be careful to insert the pouch squarely
into the machine.
• Use the jam release function to
remove the document.
Laminated material looks misty.
• Laminate the same document again.
Operating Instructions
1. Plug the laminating machine into a nearby polarized electrical outlet.
Turn on the power switch on the front of the machine. You will see a red
power indicator light. Make sure the switch is set to “normal operation.”
2. Wait for the machine to warm up. (This usually takes about 15 minutes.)
When the machine is ready to operate, you will see a green ready light.
3. Open the cover in the back to support the pouch as it exits the machine.
4. Place the document inside a laminator pouch and align it with the closed
end of the pouch, making sure the document is completely inside.
5. Insert the closed end of the pouch into the opening at the front of the
machine.
6. The pouch will feed automatically through the machine and exit at the
back. Wait until the pouch has exited completely and is on the document
support. Use caution when retrieving the document, as it may be hot.
7. To correct misfeeds, move the switch to the “jam release” position. Hold
the machine firmly and pull the document out.
8. Turn the power switch off when you are finished.
power
indicator
(red)
ready light
(green)
document support
normal operation/
jam release switch
power switch
pouch
entrance
3