Step 1.
Before fitting the bathscreen, attach the panel levelling gasket underneath the end of the fixed panel.
Step 2. Fit glass support under outer end of glass. Carefully lift screen into position, push fully into wall
profile & down onto bath rim. Check & adjust screen for plumb and ensure parallel to bath edge.
Step 3. From inside enclosure, using the wall profile holes as a guide, drill Ø3 pilot holes, and screw fixed
panel to wall profile using 3.5x8 self tapping screws (3 places). Push fit the cover section. Remove glass
support.
1
2
3
Page 5
