Adjust door so that bottom edge of glass runs as close as
possible to guide without interference.
With the door closed, use 3mm allen key through
holes in top of horizontal rail to raise or lower the door.
Door may need moving slightly to left or right to align
hole and adjusting screw.
Z
With drip lip to INSIDE, offer threshold capping upto threshold corner. Adjacent to centre
guide
block, m
easure
/ mark length required
& n
eatly / squarely cut capping to length
Z
before fitting.
Push magnetic seals onto edge
of door glass and side panel.
Seals may be wetted to ease
fit.
threshold corner
centre guide block
(cut at this end of capping ONLY)
