Lakeland Let's Bake 31575, Instruction Booklet

Page: 8 / 28

8
INSTRUCTIONS FOR USE
The Let’s Bake Stand Mixer is fully interlocked for safety, it won’t switch on unless the arm
is tilted downwards.
• Check the speed dial is in the ‘OFF’ position.
• Plug in and switch on the stand mixer at the socket.
• The light around the speed dial will blink.
• Press the ‘TILT’ button to raise the arm into the upwards position. Add your ingredients
into the mixing bowl.
• Do not operate the appliance when empty. The maximum working capacity is
2 litres (2kg), or 1.2 litres (1.2kg) for heavier ingredients such as flour and water,
or dough.
• Press the ‘TILT’ button to lower the arm into the downwards position, the ‘TILT’ button
will click fully out.
• When you switch on the stand mixer for the first time there may be a slight burning
smell, this is normal for a new appliance and will stop after a few uses.
• To start mixing, twist the speed dial clockwise. Move slowly through the speeds to the
speed you require, the light around the speed dial will be solid when the appliance is
mixing.
•
DO NOT
put your hands or utensils inside the mixing bowl while the stand mixer is on.
If adding food to the bowl. While the stand mixer is on, twist the speed dial to ‘off’
first. If you are using the splatter guard, add food through the feed hole, pulse the
stand mixer if the attachment is blocking the feed hole.
• If you need to scrape down food from the sides of the bowl, switch off the appliance
and use a spatula.
• Always switch off and unplug the appliance before you attach or remove any of the
attachments.
• Do not operate the stand mixer continuously for more than 6 minutes. Allow the motor
to rest for 15 minutes between each use. Most mixing tasks will take around 3 minutes.
• To stop the stand mixer, twist the speed dial back to ‘OFF’. The stand mixer will
continue to rotate for a few seconds after being switched off. Wait until it has fully
stopped before pressing the ‘TILT’ button to raise the arm and remove the bowl.