Lakeland 63481, Instruction Booklet

Page: 10 / 20

10
INSTRUCTIONS FOR USE
PRE-HEATING
To make a cup of good hot espresso coffee, we recommend you pre-heating the appliance
before making coffee, including the portafilter, filter and your cup, so that the coffee
flavour is not influenced by the cold parts.
1. Remove the water tank and fill it with fresh water, the water level should not exceed the
‘MAX’ mark in the tank. Then place the water tank on to the appliance properly.
2. Place the desired filter into the portafilter. Attach the capsule portafilter to the appliance
with the handle by the “ ” position, turn the handle anticlockwise until it is at the
“ ” position.
3. Place your espresso cup on the drip plate. Make sure the water/steam knob is on the
“ ” position.
4. Plug in and switch on at the socket and press the power switch on the side of the
appliance to the on ‘I’ position. The LCD display will start flashing.
5. When the LCD illuminates in full, press single-cup button “ ”, hot water will flow out
into your espresso cup.
6. When the appliance stops pumping water automatically, the pre-heating is finished.
MAKING ESPRESSO COFFEE
1. Remove the portafilter by turning it clockwise. Add ground coffee to the filter with
the coffee spoon, a spoon of ground coffee can make about a cup of top-grade
espresso coffee, then press the ground coffee tightly with the damper at the end of the
coffee spoon.
2. Attach the capsule portafilter to the appliance with the handle by the “ ” position,
turn the handle anticlockwise until it is at the “ ” position.
3. Empty out your pre-heated espresso cup and place back on the drip plate.
4. Select single cup “ ” or double cups “ ” button according to your demand.
After waiting for a moment, your espresso coffee will start to flow.
5. The appliance will stop when the brewing cycle has finished and then your coffee is
ready now.
WARNING:
Do not leave the Espresso Maker unattended during making the coffee, as
you may need to operate it manually sometimes!
6. After finishing making the coffee, you can remove the portafilter by turning it
clockwise, then remove the coffee residue from the filter by flicking over the press bar
on the handle and turning over and tapping out.
7. When you have finished using, press the power switch to the off ‘O’ position.
8. When the portafilter and filter has cooled down completely, rinse under running water.