10
FREQUENTLY ASKED QUESTIONS
Question:
Why is the control unit not illuminating?
Answer:
Check that the appliance is plugged in and switched on at the socket.
Check that the control unit is properly attached to the heated throw.
Question:
Why is my control unit on but there is no heat?
Answer:
Check that the connector plug is fully pushed into the connector.
The heated throw automatically switches off after 3 hours and may have
gone into Standby mode. Slide the temperature slider to the ‘OFF’ position
and then back on.
The heated throw may be faulty or damaged. If so, contact the Lakeland
customer care team on 015394 88100.
Question:
Why is there heat discolouration on the fabric?
Answer:
There may be a fault with the appliance, discontinue use and contact the
Lakeland customer care team on 015394 88100.
HEATED THROW
220-240V 50Hz 120W
RoHS
TECHNICAL DATA
