6
USING YOUR RETRO DRINKS MAKER FOR THE FIRST TIME
1. Unpack the Retro Drinks Maker, remove all the packaging materials.
2. Before first use, wipe the main body and mixing wand with a clean damp cloth.
3. Wash the milkshake cup in warm soapy water, rinse and dry thoroughly.
4. Make sure that all parts are clean and dry before assembling the product.
5. Check that the Retro Drinks Maker has no visible damage and that no parts are missing.
6.
WARNING:
Do not insert the plug into an electrical outlet, or turn on the Retro Drinks
Maker before you have fully assembled it.
INSTRUCTIONS FOR USE
1. Place the appliance on a dry, flat, heat-resistant surface, near a socket.
2. Prepare your ingredients and add them to the milkshake cup.
3. Slide the lip of the milkshake cup into the cup support. If the lip of the milkshake cup
is not properly located in the cup support at the top and resting on the cup rest at the
bottom, the appliance will not work. This is a built in safety feature.
4. When the milkshake cup is securely and properly placed onto the cup rest, turn the
Retro Drinks Maker on to the “Pulse’ setting by pressing the On/Off/Pulse Switch up
into the ‘II’ position. Hold this button down for approximately 10-15 seconds.
5. Then run the Retro Drinks Maker on the ‘I’ setting for approximately 30-45 seconds.
6.
DO NOT
run the Retro Drinks Maker for more than 3 minutes at a time, allow the
appliance then to rest for 5 minutes between cycles to cool down.