Lakeland 61770, Instruction Booklet

Page: 11 / 20

11
INSTRUCTIONS FOR USE
• Make sure both griddle plates are fixed securely on the grill before switching on,
otherwise the grill will not preheat properly. Never plug in and switch on the grill
without the griddle plates in place.
• Place the Smokeless grill near a socket on a dry, level heat resistant surface or
heatproof. The grill should only be used in a well ventilated area, at least 30cm away
from walls and other surfaces to allow sufficient airflow. Make sure the temperature
dial is turned to MIN.
• You do not need to add extra oil when grilling. If oil is required add it now, ensure the
griddle plates are completely dry before brushing or wiping lightly with kitchen towel
coated with a little oil. Add oil sparingly or the griddle plates will smoke.
• Plug into the socket and switch on.
•
• Select the temperature you would like to cook at on each of the hotplate temperature
controls, between 90°C - 230°C. The READY light will come on to show the grill is
switched on and illuminate green .
• When you switch on the Smokeless grill for the first time there may be a slight burning
smell. This is normal for a new product and will disappear after a few uses. So we
advise heating up the grill empty on first use.
• After a few minutes, the green READY light will turn off , to show the griddle plates
have heated up to temperature and the grill is ready to use. Always ensure the READY
light has turned off , otherwise your food may stick and not cook through properly.
• Add your food to the griddle plates.
• Do not use metal utensils with the grill, this will damage the non-stick coating on the
griddle plates. Use heat resistant plastic or wooden utensils.
• The ready light may come back on for a while as the grill has lost heat whilst the fresh
raw food has been added or the temperate has changed. This is normal and will turn
back off once the griddle plate is back up to temperature.
• Once your food is cooked, turn the temperature control MIN and switch off and unplug
at the socket. Remove your food and serve.
• Allow the appliance to cool down completely before removing the griddle plates,
moving or cleaning.
• Empty the drip trays and clean it after every use.
Each griddle plate works independently so you can use one or both griddle plates at
different temperatures.
Switch on the fans. The power light will come on and illuminate red.
.