manualshive.com logo in svg

Lake Shore F41, Quick Start Manual, Page: 9 / 16

Share
Download
Lake Shore F41 Quick Start Manual Download Page 9

9  

http://www.lakeshore.com/products/Gaussmeters/F71-F41-teslameters/

F71/F41 Teslameter Quick Start Guide

 

„

Range: Sets the maximum readable field and 
display resolution. The F71/F41 teslameter is 
equipped with an autoranging feature that will 
automatically select the appropriate range for 
the measured field. Select the range you wish to 
use, then click 

OK

. 

 

NOTE: 

Autorange is the default setting. 

Navigation drawer

Tap the Settings menu 

 to go to the navigation 

drawer to adjust settings.

 

„

Measurement setup: Includes settings for 
Measurement mode, Averaging window, Range, 
Units, and Temperature compensation.

 

„

Sensor Information: Provides general 
information about the probe.

 

„

Analog output: Selects which channel’s analog 
signal is routed to the output.

 

„

Digital I/O: Use this screen to configure the 
functionality of the inputs and outputs. 

 

„

System settings: Use this screen to adjust 
settings, including Wi-Fi, display and sound, 
firmware updates, and privacy

Summary of Contents for F41

















Reviews:

No comments