Lake People VIOLECTRIC DHA V590, User Manual

Page: 20 / 66

20
THE BALANCED HEADPHONE OUTPUT
VIOLECTRIC DHA V590
offers a dedicated headphone output
to connect balanced headphones.
The output is situated on the front
panel and comes as a gold plated
4-pin XLR socket.
THE UNBALANCED HEADPHONE OUTPUTS
The DHA V590 offers two stereophonic headphone outputs,
each equipped with a 6.3 mm (1/4") TRS jack socket.
Because DHA V590 has a 4-channel amplifier (2 x stereo),
each socket is driven by a dedicated stereo amplifier
Please note:
The RIGHT phone jack is connected to the in-phase stereo signal, whereas the left phone jack is
connected to the 180
0 phase shifted signal.
HINT:
To protect the headphones from interferences during powering on/off the outputs are cut during
powering on. This procedure takes about five seconds. When powering off the outputs are cut
instantly.
THE LINE OUTPUTS
THE UNBALANCED LINE OUTPUTS
are located on the rear panel of the unit and are marked as “RCA OUT L/R”.
Gold-plated RCA connectors are implemented here.
THE BALANCED LINE OUTPUTS
are located on the rear panel of the unit and are marked as “XLR OUT L” and “XLR OUT R”.
Gold-plated XLR connectors are implemented here.
Hint:
With a balanced-to-unbalanced adapter this connection may also be used for unbalanced cables.
PLEASE NOTE THAT IN THIS CASE PIN 3 HAS TO BE LEFT OPEN!
Balanced Headphone
Socket Pin-Out:
Pin 1 (+) Left channel
Pin 2 (-) Left channel
Pin 3 (+) Right channel
Pin 4 (-) Right channel
Unbalanced Headphone
Sockets Pin-Out:
TIP Left channel
RING Right channel
SLEEVE GND
Balanced Interconnection
of the XLR Socket:
Unbalanced Interconnection
of the XLR Socket:
PIN 1 GND PIN 1 GND
PIN 2 in PHASE PIN 2 Signal
PIN 3 out of PHASE PIN 3 OPEN !!