background image

Lake Lite Inc. 

2301 Fairfield Ave, Suite 107 

Fort Wayne, IN 46807 

Phone: 260-918-2758 

Fax:       260-918-3540 

E-mail   [email protected] 

www.lakelite.com 

www.solarmarinelites.com 

Solar Dock Post Lites 

            

MODEL: LL-SDL-Round / Square / Rectangle 

Q: My light does not work.

 

1.

Make sure battery is securely in place & in proper position. 

2.

Your LED may be installed backwards. Try reversing. 

  

Q: I replaced my LED with a different color LED but it did not  illuminate.

 

1.

The battery must be charged and the LED must be properly installed in order for the LED to illuminate. 

2.

After installing the LED try placing the unit in a dark area. The light is activated and turned on by the dark. 

3.

FOLLOW INSTRUCTIONS AGAIN CAREFULLY! 

4.

You may also visit www.lakelite.com for more detailed instructions or call Lake Lite at 260-918-2758. 

5.

  

Q: My light has a short run time.

 

1.

Improper location. The light is powered by the sunlight, place light in direct sunlight. 

2.

Batteries may be dead, replace with new Ni-Cd or Ni-Mh batteries. 

3.

You may be using the BOOST option with low capacity batteries: Try purchasing Ni-Mh types of 2000-2500mA. 

  

Q: My light is very dim.

 

1.

LED may have poor connection in socket: Check connection: (in a very rare instance the LED may be faulty, please contact us) 

2.

Batteries may be dead, replace with new Ni-Cd or Ni-Mh batteries. – This is the most common reason. 

3.

Dock Lite is in a shaded area and is not receiving full sunlight throughout the day. Place in sunny area not shaded by objects. 

  

Q: My Solar Dock Lite fits very tight or very loose on my dock post.

 

1.

Make sure there are no abrasions on your post. If so, file or sand to clean excess paint, burrs, or abrasions. These are very common! 

2.

Pipe sizes & tolerances vary; you may wrap you post with Duct Tape or equivalent to provide a more snug fit. 

3.

Secure light by tightening set bolt. 

4.

If you have a LAKESHORE PRODUCTS INC. dock you may need a separate 2.00  OD Exact fitting. Please call.  

Q: I am having troubles securing my Solar Dock Lite using the universal flat surface mount.

 

1.

Use mounting screws or bolts that fit your mounting requirements. (not included) 

2.

Make sure mounting holes are sealed if placing in a wet area! (i.e. caulk or equivalent) 

  

IMPORTANT

: For best performance, replace with rechargeable AA Ni-Cd or Ni-Mh batteries every 2 seasons of use! 

 

CAUTION: CONTAINS NICKEL-CADMIUM BATTERIES. BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY. 

Troubleshooting

 

Storage Tips (Winter)

 

Extreme winter weather can reduce the life expectancy of your Solar Dock Lite 

 

 

1.

Cold weather can dramatically reduce the life expectancy of your rechargeable Ni-Cd or Ni-Mh battery.  

2.

Store your Solar Dock Lite inside during cold months when your dock is not in use 

3.

If you have glued your Solar Dock Lite base unit to your Brock post you may simply remove the Solar Top (Electronics Portion) and store 
inside if you don’t plan to store you Brock posts inside. 

Summary of Contents for Solar Dock Lite LL-SDL-Round






Reviews: