Use the provided screws to secure the silicone pad and
cover. Fully tighten screws to ensure the chamber is water
proof. Make sure wires are not obstructing the silicone pad.
Place light onto piling and mark holes. Drill small pilot holes
in piling with drill bit. Use screwdriver to secure the light to
your piling with mounting screws
–
Not Included
Verify that silicone screw caps are in place.
Verify that the base of the light is secured to the piling.
Verify the set screw holding the light to base is tight.
7
8
Use the long screws to assemble the light fixture.
The lens is optional: With lens the pagoda will illuminate
more. Without the lens more light will escape outward.
Silicone Pad
Battery
TOP
5
6
MouMounting Screws
SOLAR PAGODA LITE
MODEL: LL-SPL-PAG-WBA
Wood Piling
Screwdriver
Wood Piling
Cover with LED
Screws
Screw Covers
TOP
Level 2
Level 1
Base
Mount
Lens
Lake Lite Inc.
100 Industrial Dr.
Avilla, IN 46710
Phone: 260-918-2758
E-mail [email protected]
Website www.lakelite.com
