Innovative
Technology
for a
Connected
World
WL 3000
User Manual
global
solutions:
local
support
TM
Americas: +1.888.246.9050
Europe: +46.31.704.67.57
Asia: +86.755.2714.1166
CAUTION: READ MANUAL BEFORE OPERATING COOLING UNIT
– Input power must be rated for 230 VAC at 50 or 60 Hz.
– Use water or water/glycol as coolant.
– Run the cooling unit at the correct coolant level,
otherwise cooling capacity will be reduced.
– Clean the filter periodically, otherwise the pump may degrade over time.
– Use cooling hoses that can handle max pressure of liquid circuit and is
resistant to corrosion from coolant.
-–Never operate the unit if it is damaged or leaking.
– Before starting any service work on the cooling unit, please disconnect
from the main power source.
Page 1 / 9
WL 1000
1201.38ae
Laird Technologies Liquid Cooling Systems
[email protected]
www.lairdtech.com/thermal
Inlet: O; outlet: O
Coolant inlet and outlet are marked with symbols:
