SDC-CF22AG
Hardware Integration Guide
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/bluetooth
11
© Copyright 2015 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0600
Pin #
Pin Name
I/O
Power Type
Description
39
BT_ACTIVE
Input from BT device.
When high, indicates that Bluetooth is transmitting
or receiving. The Summit radio does not transmit when
BT_ACTIVE is high.
Tie to GND when not used
40
Slot0_nVS2
Not Used. Leave Open (Float)
41
Slot0_RESET
Card reset. Active high.
42
Slot0_nWAIT
Current access is extended.
Active low.
43
INPACK
This signal must be inactive until the card is configured.
44
Slot0_nREG
Current access is to attribute memory. Active low.
45
WLAN_ACTIVE
Output to BT device. When high, indicates that WLAN is
transmitting or receiving.
Do not connect when not used
46
Slot0_nSTSCHG
Module status change. Active low.
47
Slot0_data8
Data bus, bit 8
48
Slot0_data9
Data bus, bit 9
49
Slot0_data10
Data bus, bit 10
50
GND
Ground
M
ECHANICAL
S
PECIFICATIONS
Connector Overview
CF22AG connector: 50-pin connector
