Sentrius RG1xx
Quick Start Guide
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/ramp
5
© Copyright 2017 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
Figure 1: Top of the
Sentrius™
RG1xx gateway
1.
LoRa and Wi-Fi antennas
2.
LEDs
3.
Fixing holes
4.
User button
Figure 2: Back panel of the
Sentrius™
RG1xx gateway
1.
DC power input
2.
User button
3.
Reset button
4.
SD card slot
5.
Ethernet connector
3
C
ONNECT THE
H
ARDWARE
3.1
Connect the Gateway
To use the gateway, you must power up the gateway and access the web interface via the Ethernet port. To do
this, complete the following steps:
1.
Follow the label on the box and connect the three antennas. Refer to
Antenna Configuration
for additional
information.
2.
Connect the power supply (see #2 in
Figure 3
).
3.
Connect the gateway to your router (#3 in
Figure 3
) using the Ethernet cable (#1 in
Figure 3
).
Figure 3: Connecting the gateway
1
2
3