800-898-0759 • 845-339-9555 • 2000 Sterling Road • Mount Marion, NY 12456 • www.lairdtelemedia.com
LTM-CVDA2
1x6 Buffered Component Video
Distribution Amplifier
Buffered Inputs and Outputs:
Each channel and each signal is opamp buffered both for inputs and outputs
Line Driver Outputs:
True 75
Ω
video line driver circuitry used for all outputs.
Universal Circuitry:
Each input can be used for signals other than component. The LTM-CVDA2 can be
used as a multi-channel composite distribution amplifier as well. S-Video (Y/C) can
also be used. It is also possible to mix signals from any video signal format.
NTSC & PAL Compatible:
Signals can be any of the worlds video signal formats.
Universal Voltage:
The LTM-CVDA2 can be used for 110 or 220 volt line voltage.
1. The LTM-CVDA2 features internally terminated inputs. There is no requirements to externally terminate any of the inputs.
2. Component signals are typically indicated with the terms R-Y, B-Y and Y. In some countries the terms YUV is also used.
3. Connect the output of the signal source to the corresponding input connector of the rear panel.
4. Following the nomenclature for each channel, connect the destination equipment to the proper rear panel connectors.
5. The LTM-CVDA2 requires no adjustments or calibrations. The unit is shipped unity calibrated.
The LTM-CVDA2 is designed to work with any standard analog video signal. Should the requirement be such that there is
a need for signals other than component signals, simply connect those signals and follow the correct input-output proce-
dures. See the applications diagrams for such configurations.
M
ULTIFORMAT
U
SE
S
TANDARD
C
ONFIGURATION
G
ENERAL
F
EATURES
Master Source
Deck 1
Deck 2
Diagram 1-A
Typical 1x2
configuration
- Page 2 -
Summary of Contents for LTM-CVDA2
Page 2: ......
