Bx600 Series of Breakout Boards for BL600 module
User Guide
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/bluetooth
24
Laird
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
4.1.2
Inserting CR1632 Coin Cell Battery into Holder
Figure 23
shows the CR1632 coin cell orientation for inserting into the holder.
Figure 23: Inserting the coin cell battery
Figure 24
shows the CR1632 coin cell inserted.
Figure 24: Coin cell battery inserted into holder
4.2
External System VCC via J4 or U3
The schematic shows the BA600-0x, BC600-0x and BB600-0x Breakout Board power supply section circuitry only.
WARNING: Maximum allowed VCC for BL600 is 3.6V. If an external supply voltage greater than 3.6V is used
the directions in section
4.3.2.
(below) should be followed to add the linear regulator, U3, and the
external components needed for proper operation and connection with the VCC supply net on the
BL600 breakout board.
Note:
The decoupling capacitor, C2 (0.1uF, 0402), should be fitted on the BB600 when connecting any
VCC source.
