https://www.lairdconnect.com/wireless-
modules/bluetooth-modules
3
© Copyright 2021 Laird Connectivity, Inc.
All Rights Reserved
Americas
: +1-800-492-2320
Europe
: +44-1628-858-940
Hong Kong
: +852 2923 0610
To enter DTM, follow these steps:
Open UwTerminalX.
Ensure you’re using the latest version of UwTerminalX by clicking the
Update tab and then, in the UwTerminalX
panel, click
Check for Updates
.
When you’re running the newest version of UwTerminalX, open the
Config
tab.
In the device drop down, select
BL654
to populate the default communications settings.
Select the correct COM port.
If you cannot select
BL654,
manually select the following UART settings (shown in
):
COM Port
Port corresponding to your development kit
Baud Rate
115200
Parity
None
Stop Bits
1
Data Bits
8
Handshaking
CTS/RTS
Figure 2: UwTerminalX Settings
Click
OK
to connect.
