©
2021
鸾翼科技
版权所有
7
3. Take out the part 3 to unfold the handle, loosen the tilt axis fixing button, insert it as shown in the picture,
and then lock the tilt axis fixing button.
Place the PTZ on the adjustment bracket
The tilt/roll/horizontal axis should be locked after the handheld PTZ is assembled, and the three-axis mechanical
lock position is shown as the picture.
Install the camera
FALCON PTZ is available for the most of majority of cameras on the market
Installation steps
1.Firstly, take out the plate and select the corresponding camera fixing screw (camera fixing screw 3/8"-16 or
1/4"-20),install the plate at the bottom of the camera. Adjust the position of the plate according to the center of
gravity of the camera. For example, if the center of gravity of the camera lens is forward, the bottom plate will be
Installed with the long side facing forward.
3
Tilt damping lock
Roll lock
Horizontal lock
