LAI Games VIRTUAL RABBIDS THE BIG RIDE, Operator'S Manual

Page: 64 / 115

64
VIVE HEADSETS
Each headset is driven by a single PC. Player position 1 headset is driven by PC1 and player position 2
headset is driven by PC2.
The headsets track the players head position and orientation by using the “Headset Tracking Sensor
1” and “Headset Tracking Sensor 2”. Both these sensors must be operating and unobstructed to
allow headset tracking to function. They must be able to see each other as well as the headsets.
Headsets have an LED to indicate headset status:
Bright Green: The headset is operating normally.
Dim Green: the headset has entered standby mode. Wake up the headset by moving it within view
of the sensors.
Red: Software is not communicating with the headset.
Off: No power is applied to the headset.
Sensors show a green letter to identify them. Please check the sticker next to the base station to
confirm the correct letter. Both sensors should have a different letter for proper operation.
The status LED indicates the following:
•
Green: Sensors are ready for use.
•
Dim Green: The sensors have gone into standby mode. This should not occur, but If it does
then the game power needs to be restarted.
•
Blue: The sensors have been knocked too hard and they are still stabilizing.
•
Purple: The sensors are unable to see each other.
•
Off: No power is applied.