LAI Games VIRTUAL RABBIDS THE BIG RIDE, Operator'S Manual

Page: 59 / 115

59
PARTS DESCRIPTION
SPEAKERS
Each seat has a pair of woofers and tweeters, with crossover mounted below the seats.
The audio is provided by PC1 only and played through speakers in both seats.
Audio volume can be adjusted by the amplifier accessible by the rear service door.
COUNTERS
Counters will increment for each coin input. Counters are under firmware control and are not
directly connected to the mechanisms.
FANS
Blower fans are under software/firmware control and driven independently of each other. Fan
speeds are set simulating the video seen by the player in each seat.
Fan control commands are provided by PC1 only.
PCs
2 PCs are used in the game and are internally networked together. PC1 drives the headset 1 video.
PC2 drives the headset 2 video.
PC1 is also considered the “master” in that it also controls the seat motion and audio. It also displays
the operator menu.
HDMI SWITCH
Video output from the 2 PCs can be shown on the top attract monitor. By default, PC1 output is
shown. PC2 output can be displayed to perform diagnostics if needed.
Different PC outputs can be selected by pressing the button on the HDMI switch.
COIN MECHANISM/BILL ACCEPTOR/CARD SYSTEM
Credits can be inserted via a coin mech, bill acceptor and/or card system connection. All interfaces
are located inside the front coin door on the front sled section.
IO BOARD – FB216
The FB216 is the main logic IO board for the game. It contains firmware to read and control buttons,
coins, counters and fans.
FIRMWARE
Note that the current version of firmware on FB216 can be seen in the top right-hand corner of the
operator menu on PC1.