Pag
e
5
SAFETY PRECAUTIONS
The following safety precautions and advisories are used throughout this manual and are
defined as follows.
MACHINE INSTALLATION and INSPECTION
When installing and inspecting
Speed of Light
, pay attention to the following points to
ensure that players can enjoy the game safely.
Always turn Off mains power before removing safety covers to work on the
machine, and refit all safety covers when work is completed.
When unplugging the game from an electrical outlet, grasp the plug, not the line
cord.
Always connect to a grounded electrical outlet with a securely connected ground
line.
Do not install the game cabinet outdoors or in areas of high humidity, direct water
contact, dust, high heat or extreme cold.
Always use a digital multimeter, logic tester or oscilloscope for testing integrated
circuit (IC) logic PC boards. The use of a continuity tester is not permitted.
Do not connect or disconnect any of the integrated circuit (IC) logic PC boards while
the power is ON.
Do not use any fuse that does not meet the specified rating.
Before switching the machine on be sure to check that it has been set on the correct
voltage for your area.
Check that the feet levelers are set correctly on the floor so that the game cabinet is
level and stable.
Always make complete connections for the integrated circuit (IC) logic PC Boards
and other connectors. Insufficient insertion can damage the electrical components.
Only qualified personnel should inspect or test the integrated circuit (IC) logic PC
Boards.
* WARNING! *
Disregarding this text could result in
serious injury
.
* CAUTION! *
Disregarding this text could result in damage to the machine.
* NOTE! *
Is an advisory text to hint or help understand .
Summary of Contents for Speed Of Light
