Operator's Manual –
Snap Shot
©
LAI GAMES
37
NETWORK SETTING
This screen is used for connecting to the Internet via Wifi and also for testing the
internet connection.
NOTE: The game can also be connected to the Internet via a standard LAN
connection. There are not settings required for this LAN connection and it just
requires the the LAN cable to be into the connector on the computer. It will only work
with routers that generate an IP Address Automatically and will not work with
static/fixed IP address systems.
For the Wifi to operate the game must be fitted with a special USB WiFi modem, this
is normally fitted on top of the printer to maximise the Wifi range. These WiFi
Modems are fitted standard on new model Snapshots but if your Snapshot does not
have one fitted please contact your nearest
LAI Game
distributor or office to enquire
about ordering one.
Wi-Fi Setting
Selecting this option will bring up the standard Wifi Connection screen and it will
search for available Wi-Fi connections, and allow you to then select which one to
connect to. If your wireless is secure it will then bring up screens for auto connection
to your WiFi router, unless you are very familiar with this “skip” these two screens
and then you will be required to enter your Security Key. To do this you can bring up
the onscreen keyboard by tapping the “Keyboard” dialog button in the bottom right
corner of the screen. Type in the required password, and follow on-screen instructions
for completion. The next time the game is turned on it will remember the setting and
password, and automatically connect.
Test Connection
This option tests if the internet is working or not and is operated by tapping the Test
Connection dialog Button, if the connection is OK it indicates “Connection Success
“there is also a green box in the top right side of the test mode screen indicating
whether the internet is on or off.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
