LAI Games Most Wanted, Operator'S Manual

Page: 41 / 46

Operator's Manual
–
Most Wanted
© LAI GAMES
36
* NOTE! *

Polarity Key is to prevent accidental reverse insertion of edge connector

Check and adjust the +5VDC that it is between 4.8 and 5.1 Volts at the
edge connector.
MOST WANTED JAMMA & CONNECTOR LIST
SOLDER SIDE JAMMA PARTS SIDE ULN DRIVER
GND A 1 GND 1 RECOIL SOLENOID*
GND B 2 GND 2 RECOIL SOLENOID*
+5V C 3 +5V 3 RECOIL SOLENOID*
+5V D 4 +5V 4 RECOIL SOLENOID*
E 5 5 (NC)
+12V F 6 +12V 6 (NC)
POLARIZING KEY H 7 POLARIZING KEY 7 (NC)
J 8 TICKET DRIVE 8 (NC)
K 9 START LAMP 9 (NC)
SR L 10 SPEAKER –R *Note: Solenoid Drivers all
SL M 11 SPEAKER –L Wired in Parallel
(NC) GREEN* N 12 (NC) RED*
(NC) SYNC* P 13 (NC) BLUE* EXTERNAL VOLUME
SERVICE R 14 (NC) VIDEO GND* 1 AUDIO RETURN 1
S 15 TEST 2 AUDIO OUT 1
COIN SWITCH 2 T 16 COIN SWITCH 1 3 AUDIO RETURN 2
TRIGGER SWITCH U 17 START SWITCH 4 AUDIO OUT 2
V 18 UP SWITCH 5 AUDIO GND (SHIELD)
DOWN SWITCH W 19 Note: Set onboard volume to
X 20 Minimum levels when
CALIBRATE SWITCH Y 21 Using external controls
A 22
a 23 GUN CONNECTOR
b 24 TICKET NOTCH 1 OPTICAL INPUT
COIN COUNTER c 25 TICKET COUNTER 2 +5VDC
d 26 3 (NC)
GND e 27 GND 4 (NC)
GND f 28 GND 5 LOGIC GND
*Note: JAMMA Video Outputs used for CGA Games only.
Use the 15pin Monitor Plug for Most Wanted (VGA)