10HP
Explosion
‐
proof
Vacuum
Dust
Collector
Manual
14
GENERAL TOOL ASSEMBLY
This step requires two adults. This 10HP Explosion-
proof Vacuum Dust Collector is heavy, be careful when lifting and handling it!
Failure to comply may cause serious injury and/or damage to the machine
and/or property!
Tools Required
10mm wrench / 12mm wrench / 14mm wrench
Phillips screwdriver
4mm hex wrench / 5mm hex wrench
To assemble your dust cyclone, follow these steps:
For your own safety, do not connect the machine to the power source until
the machine is completely assembled. Please also make sure that you read
and understand the entire instruction manual.
ASSEMBLY TIME ESTIMATE
1 hour to 2 hour
Step One: Use a forklift to lift the unit up by inserting the forks into the
bottom as shown below. Be careful not to hit the proximity sensors on the
drum lid when inserting the forks.
