laguna WBSCH, Manual, Page: 3 / 9

ASSEMBLY INSTRUCTIONS:
(FIG. 1)
Please insert the cap screw (No. A) with washer (No.
B) into the right stand (No. 3). Insert the wood pin at
the center hole.
See (FIG. 1)
(FIG. 2)
Repeat the same steps on the other side of the left
stand.
See (FIG. 2)
(FIG. 3)
Attach the side support (No. 4) to the right stand as
shown and secure with a moon nut (No. E) and hex
nut (No. D). Tighten with the supplied 5mm Allen
Wrench (No. C) and a 14mm wrench as shown.
See (FIG. 3)
(FIG. 4)
Repeat Step 3 with the other side support.