laguna REVO 18, Manual

Page: 10 / 56

10
Noise Emission.
Notes concerning noise emission:
Given that there exists a relationship between noise level and exposure times, it is not
possible to precisely determine the need for supplementary precautions. The factors
affecting the true level of exposure to operators are clearly the amount of time exposed and
the characteristics of the working environment, such as other sources of dust and noise, etc.,
for example, adjacent machines - in other words, the level of ambient noise. It is possible that
exposure level limits will vary from country to country.
Specification sheet.
Motor Induction,1725RPM, 2 HP 220V Induction,1725RPM, 1.5 HP
110V
Voltage 220v 60hz single phase input, 3
phase output
110v 60hz
single phase input 3
phase output
Recommended
breaker size
15 amp 15 amp
Swing over bed 18" (457mm) 18" (457mm)
Swing over banjo 13.5" (343mm) 13.5" (343mm)
Outboard swing
max
32" (813mm) 32" (813mm)
Distance between
centers
36" (914mm) 36" (914mm)
Floor to spindle
center
41.5"(1054mm) 41.5"(1054mm)
Floor to bed height 32.5" with pads (826mm) 32.5" with pads (826mm)
Floor space W60" D26" H47"(1524mm,
660mm, 1194mm)
W60" D26" H47"(1524mm,
660mm, 1194mm)
Tool rest 12" (305mm) 12" (305mm)
Speed range high 135 - 3500 RPM 135 - 3500 RPM
Speed range low 50 - 1300 RPM 50 - 1300 RPM
VFD DeltaS1 variable frequency
drive
DeltaS1 variable frequency
drive
Drive belt Poly-groove drive belt with
easy access
Poly-groove drive belt with
easy access
Spindle 1.25" x 8 tpi right hand thread 1.25" x 8 tpi right hand thread
Spindle taper MT 2 MT 2
Spindle lock Spring loaded Spring loaded
Spindle index 14 / 36 / 48 positions with lock 14 / 36 / 48 positions with lock