laguna PX|22 Sheartec:II, Owner'S Manual

Page: 37 / 52

37 PX|22 Sheartec:II Planer \ Wiring
Wiring
WARNING
REVIEW ELECTRICAL SAFETY PRIOR TO ANY WIRING PROCEDURES.
MPLANPX2275-0130
VOLTAGE 220V
PHASE 1PH
HERTZ 60Hz
FULL LOAD AMPERAGE 32 AMP
Below are RECOMMENDATIONS to be used for this machine based on the above
information. Variables that may affect this are:
·
Actual voltage supplied to the machine
·
Electrical code that must be met in your local province.
An electrician will verify that all the demands are met to properly wire the machine. If you have
absolutely any doubt when wiring this machine - please consult with a qualified electrician.
PLUG/RECEPTACLE Not Included
WIRING (Gauge) See Jacket Printing
CIRCUIT BREAKER 40 AMP
MPLANPX2210-0130
VOLTAGE 220V
PHASE 3PH
HERTZ 60Hz
FULL LOAD AMPERAGE 28 AMP
Below are RECOMMENDATIONS to be used for this machine based on the above
information. Variables that may affect this are:
·
Actual voltage supplied to the machine
·
Electrical code that must be met in your local province.
An electrician will verify that all the demands are met to properly wire the machine. If you have
absolutely any doubt when wiring this machine - please consult with a qualified electrician.
PLUG/RECEPTACLE Not Included
WIRING (Gauge) See Jacket Printing
CIRCUIT BREAKER 35 AMP
9