29) Do not load more than one workpiece at a time onto the machine.
30) When wood panels are cut, harmful dust is produced. The machine must be equipped with a proper
dust-collecting system.
31) Use only properly sharpened and serviced saw blades. Never exceed the maximum RPM marked
on the saw blade. The optimum cutting speed must be selected by the user.
32) Report any problems with the machine, guards, or saw blades as soon as they are discovered.
33) Implement safe procedures for cleaning and maintenance. It is important to remove chips and dust
regularly to avoid the risk of fire.
34) The saw blades should be sharpened and maintained win compliance with instructions supplied by
the saw blade manufacturers.
35) Ensure that any spacers and spindle rings are used in strict accordance with the recommendations
of the manufacturer.
36) Never remove any cut-off parts of the work piece from the cutting area while the machine is
running.
37) Ensure that the guards and other safety devices necessary for the machine's operation are in
position, in good working order, and properly placed, well-maintained, and secured.
38) Safe working practices.
a) Use of push block and push stick: a push stick should be used in cases when the operator's body
parts could get close to the area of the saw blade. Push blocks should be between 300mm and 400mm
long, 80mm to 100mm wide and 15mm to 20mm tall. Push blocks should be utilized when
cutting small work pieces and in circumstances where it is necessary to push the work
piece against the fence.
b) Selection of the saw blade and riving knife: the operator should only select a saw blade that has
a diameter and thickness suitable for the machine.
c) Selection of riving knife slot: the riving knife guiding slot should be no more than 0.5mm wider than
the riving knife guiding elements.
d) Mounting of the saw blade: If the spindle diameter is less than the diameter of the saw blade bore, a
proper bushing should be used. The bushing must be provided by the machine's manufacturer. The
usage of loose rings or bushes may result in serious injury or death.
e) Lighting: it is important to provide adequate lighting around the machine.
39) If you need to guide the work piece along the rip fence, always use the push stick. Please make sure
to keep clear of the rotating saw blade. In case the push stick is damaged, it must be replaced with a
new one.
40) Do not operate this machine while tired or under the influence of drugs, alcohol or any
medications.
41)
The dust generated by certain wood products can be hazardous to your health.
Always operate the machinery in well-ventilated areas. All machines must be equipped with a proper
dust-collecting system.
42)
Please contact our authorized representative in your area for any other questions.
5
All manuals and user guides at all-guides.com
Summary of Contents for P12/5
