laguna C FLUX 1, Owner'S Manual

Page: 6 / 54

For machines that are already assembled in your shop, follow the steps below to assemble the
crossbar to your unit for better and improved dust separation.
1.
Remove the drum and set aside to later connect back with unit.
2.
Loosen two of the bolts which are opposite each other that are connecting the drum lid to the
cyclone cone.
3.
The crossbar below is common for all models (CFLUX and PFLUX series and the TFLUX5).
4.
Take the crossbar and attach to the drum lid and tighten using the two bolts removed in the
previous step. It does not matter which position you attach the crossbar. As long as it does not
obstruct the sensor on the drum lid.
5.
Compelte the assembly by sliding your drum back in place.
CROSSBAR ASSEMBLY
TO IMPROVE PSYCLONIC SEPARATION
READ AND UNDERSTAND ALL WARNINGS AND OPERATING
INSTRUCTIONS BEFORE USING THIS EQUIPMENT. Failure to follow all instructions listed below,
may result in electric shock, fire, and/or serious personal injury or property damage.
Before removing any parts, turn OFF the machine and remove the power source.
PFLUX1 drum lid and crossbar
PFLUX2 drum lid and crossbar