Set Up | Setup Options
11
Setup Options
For operator safety, clamp the unit to a
work bench or position it securely on sawhorses.
IMPORTANT: When determining where to mount the
air cleaner, always select a location where the air flow
is unrestricted. Do not locate the unit in a corner or
near any heating or cooling vents.
Using the air cleaner on a bench or floor surface
Locate (4) rubber feet supplied with the unit. Carefully
place the Air Cleaner on a firm supporting surface with
access to the bottom of the cabinet. Apply a self-
adhesive rubber foot to the bottom at each corner of
the air cleaner cabinet. The rubber feet will help
eliminate vibration and will prevent the possibility of
the air cleaner “walking” across the floor or work
surface.
The air cleaner cabinet has convenient lifting handles
located on either side. To avoid damage to the air
filters, carry the air cleaner with the filters positioned
away from your body.
Mounting air cleaner to the ceiling or overhead
support
This unit weighs approximately 60 pounds.
When mounting overhead, be certain that the unit is
securely fastened and supported.
Never secure the air cleaner hardware to
drywall, drop ceiling tile/frame, or other non-structural
members.
Do not use rope, cable or power cord to
suspend the unit from the ceiling. Use chain rated for a
minimum of a 150 lb. working load.
1. Locate the four 1" eye bolts and the four 5/16"
Flange nuts supplied with the unit.
2. Use a flat blade screwdriver (not supplied) to
remove the four screws from the top of air cleaner.
3. Thread one flange nut on each bolt approximately
5/16".
4. Thread the eye-bolts into the four holes where the
screws were removed in STEP 2.
Be certain that the flange nuts are
tightened against the surface of the air cleaner.
When suspending the air cleaner from the
ceiling or other overhead support, use steel s-hooks
that are a minimum of 5/16".
Thread all lag hooks at least 1-1/2" into
the supporting structural members.