10
Setting Up
Your 19-38 Combo sander was adjusted and aligned at
the factory, and it has been carefully packed for shipment.
However, because of possible stress during transit, the unit
should be thoroughly checked before using. This
section covers the preoperational checks you should
make after unpacking and final assembly. Unnecessary
problems can be avoided if these essential checks are
performed before operating. Likewise, performing the
recommended monthly maintenance procedures will
help assure trouble-free service.
Connecting Dust Collectors
Dust collection is necessary for all models. The 19-38
Combo is equipped with one
4”
diameter dust exhaust
port at the top of the cover.
To attach to your collection system, install
4”
hose from
your collector. (See Tips For Maximum
Performance.) The minimum recommended dust
collector capacities is 600 cfm. For best results,
follow the recommendations of the manufacturer of your
dust collection equipment. NOTE: Some applications
will require more dust collection than the recommended
minimum CFM.
Checking Machine For Level
Proper leveling of the machine is important to achieve
continued maximum performance from the 19-38
Combo.
Fig. 4A Install knob
Fig. 4B FAST Lever
“UP”
Fig. 5
Components
Fig. 5
Components.
1.
Height Adjustment Handle
2.
Speed Knob, Sanding (RPM)
3.
Depth Gauge
4.
Conveyor Adjustment
5.
Drum/Brush ON/OFF Switch
6.
Conveyor Table
7.
Tension Rollers
8.
Drum/Brush Carriage
6
7
8
7
8
8
Summary of Contents for SuperMax 19-38 Combo
