Laguna Tools REVO 24-36, Original Instructions Manual

Page: 32 / 60

31
Variable speed adjustment knob.
Increase speed Decrease speed
The Variable speed adjustment knob adjusts the spindle speed. Turns clockwise to increase
the speed, turns counter-clockwise to decrease the speed
High / low speed.
The lathe has two sets of pulleys for high (135 - 3500 RPM) and low
(50 - 1300 RPM) speed ranges.
Adjust between the speed ranges as follows.
1. Disconnect the electric supply to the lathe.
2. Open the pulley cover.
3. Loosen the motor lock handle and lift the motor to the highest
position with the motor adjustment handle, then lock the motor lock
handle.
4.
Move the drive belt to the required set of pulleys.
5. Loosen the motor lock handle and with the motor adjustment handle tension the drive belt,
then lock the motor lock handle.
The belt should be tensioned so that there is approximately 1/8 to 1/4 " deflection when the
belt is pressed with moderate thumb pressure.
Speed range