Laguna Tools DAKE FG-75, Instruction Manual

Page: 6 / 35

961003 6 REV012021
DAKE STANDARD TERMS & CONDITIONS OF SALE
All proposals and quotations for the original sale of our products are subject to the following terms and
conditions:
ACCEPTANCE OF ORDER : All orders are subject to acceptance by Dake at its main office in Grand Haven,
Michigan.
APPLICABLE LAWS : This quotation or acceptance shall be governed in all respects by the laws of the
State of Michigan.
CANCELLATION: We reserve the right to cancel and/or refuse to complete your order if, in our opinion,
you have not established credit to promptly meet the payment terms of your order. Any cancellation
from the Purchaser may be subject to a 10% cancellation fee for any of our standard machinery and/or
component parts upon the discretion of Dake. All non-standard or special quotes will not be eligible for
cancellation, nor returns.
DELIVERY : The proposed shipment date is an estimate and is contingent upon causes beyond Dake’s
control. Under no circumstances shall Dake have any liability for loss of use or for any direct or
consequential damages resulting from delay. All shipments from the Dake facilities are F.O.B.
FREIGHT CLAIM:
Lost or damage freight claims must be submitted to Dake within thirty (30) days of
shipment from Dake’s facility. If shipment for order was set up by the Purchaser, Dake is not liable to
handle the freight claims.
PERMITS AND COMPLIANCE : Dake shall not be responsible for obtaining any permits, inspections,
certifications, or licenses required for the installation or use of the equipment. Dake makes no promise
or representation that the equipment or any services to be furnished by Dake will conform to any
federal, state, or local laws, ordinances, regulations, codes or standards.
PRICES
: Unless otherwise agreed to in writing, all prices are F.O.B. from our plants in Grand Haven,
Michigan, Grand Prairie, Texas, and Riverside, CA. In any event, the quoted prices for component parts
become invalid ten (10) days after date of quotation, and machinery may become invalid sixty (60) days
after date of quotation. Unless otherwise specified in Dake’s quotation, installation services and final
on-site adjustments are not included in the quotation.
TAXES : Prices do not include taxes. If any sales, use or similar tax is payable to Dake in connection with
any transaction or part thereof between the Purchaser and Dake with respect to goods delivered, the
Purchaser will, upon demand, pay to Dake the amount of any such tax. If you are tax exempt, please
include your exemption document when submitting your order.