CHANGING THE BLADE SPEED WITH THE HAND
WHEEL (SAW ON, AND RUNNING)
1.
Make sure the saw is geared (high or low) and
turn the saw on.
2.
With the saw powered on, running, and in either
the high or low gear setting (not neutral),
disengage the gear plate lock (Index
C
) by
rotating CCW ¼- to ½ turn.
3.
Slowly rotate the handwheel CW to increase the
speed, or CCW to decrease the speed.
4.
Reengage the lock immediately after adjusting
speed.
1,2. With the saw turned on, geared and running,
disengage the disengage the gear plate lock (Index
C
) by rotating CCW ¼- to ½ turn.
USE CAUTION:
loosening the too much will cause excessive play
and could result in damage.
3.
Slowly rotate the handwheel CW to increase the
speed, or CCW to decrease the speed.
5.
Reengage the lock immediately after adjusting
speed.
WARNING:
You must engage this lock
directly after adjusting the speed.
Summary of Contents for 18CX
