RECEIVING
Inspect the dispenser box carefully for any evidence of shipping or handling damage
before signing to receive goods. In case of shipping damage, claims should be filed
emmediately with the carrier
HOW TO INSTALL AND USE
1.
2. Ensure dispenser stands upright for a minimum of 2 hours before loading water bottle.
Keep cooler unplugged until water flows all the way through faucets
3. Place dispenser a minimum of 4 inches away from the wall to ensure ventilation.
4.
5. Do not install dispenser where it will be subject to direct sunlight, heat or moisture.
6. Wipe down the water bottle cap and neck to ensure there is no debris.
Cold Water Faucet (Blue Lever) and Hot Water Faucet (Red Lever)
Press the Blue Lever for Cold Water and Red Lever for Hot Water, respectively.
Place a cup directly below a faucet and depress the correct lever ,but be
careful using the hot water. Even when a bottle is empty, Cold Water is
available, for a small volume, but hot water is not available when the bottle is
empty.
PREPARE WATER BOTTLE
Remove the Cap Seal on the top of the bottle cap (if
necessary).
* Make sure not to remove the plastic cap of bottle.
INSTALL BOTTLE IN NO-SPILL SYSTEM
Invert the bottle and place it into the top of the No-Spill
System. As the water fills the reservoirs inside the machine, the
water leaving the bottle will be replaced with air seen as
bubbles rising in the bottle. This is normal and will stop when
the reservoir is filled. This process will repeat itself each time
water is drawn from the dispenser.
How to use Child Lock Lever
When the hot water comes out, be careful not to burn yourself.
Do not allow the children to use the dispenser unsupervised.
Cautions
push in safety button to unlock, then push down to
dispense hot water
Hot water comes out if pressing down the lever with
the safety lock pressed in.
*TOPVIEW
Hot | Room | Cold
