HUMMEL
®
01.01.2019
English / Englisch
WORKING WITH THE HUMMEL
®
5
Remove the worn sanding belt from the tensioning roller and
the sanding drum (fig. 36).
6
Position the new sanding belt on the tensioning roller of the
drive unit (fig. 37) and push it over the tensioning roller and
the sanding drum (fig. 38).
7
Position the sanding belt so that it evenly covers the sanding
drum (fig. 39,
A
).
WARNING!
RISK OF FIRE from the formation of sparks while sanding:
Position B of the sanding belt in fig. 39 provoke sparking
during sanding! Avoid this without fail!
Fig. 39
Position the sanding belt so that it evenly covers
the sanding drum (
A). Avoid position B without
fail (RISK OF FIRE)!
Fig. 36
Remove the sanding belt.
Fig. 37
Position the new sanding belt on the tensioning
roller of the drive unit.
Fig. 38
Push the sanding belt far enough over the sanding
drum and tensioning roller so that the sanding
drum is fully covered by the sanding belt.
5
27