A full length rail for mounting a scope or other aiming
device is located on the top of the upper receiver. The rail
profile is compatible with most scope mounts, however,
square shaped recoil lugs may not work. These are
typically found on quick detach, throw lever mounts such
as LaRue Tactical mounts. UTG quick detach mounts are
compatible as well as others. When installing a mount, do
not force it or you may damage the upper receiver
accessory rail.
Scope/Optics Rail
A rail for attaching a front hand grip, laser aiming device,
tactical flashight or other device is attached to the
bottom of the front handgrip. Please note, some hand
grips are not manufactured to the correct dimensions to
mount on a Mil-Std-1913 rail. Ensure the grip is correct
before attaching. Additionally, tactical flashlights
designed for use with pistol accessory rails will fit on the
accessory rail but will be a tighter fit. If the item you are
going to install needs to slide on from the front,you can
remove the two screws that hold the front cover on, pull it
forward and rotate it out of the way. You can then slide
on your grip, laser, light, etc. and re-install the front cover.
Make sure you use Blue Loctite to secure the threads.
Lower Accessory Rail