SAFETY & OPERATIONAL PRECAUTIONS
Manufacturer assumes no liability for the use or misuse of this unit.
Follow the chemical manufacturer's safe handling instructions.
TO INSTALL (REFER TO DIAGRAM ON NEXT PAGE)
1. Fasten mounting bracket to wall or other suitable surface. Use hardware that will support the weight of the unit
and product jug.
2. Slide dispenser onto mounting plate.
3. Lift push lever and place product jug with pump in jug rack.
4. If jug and pump are too tall or short, reposition jug rack to a different mounting hole on dispenser front.
Jug rack mounting hardware is accessible from rear of dispenser. See parts diagram.
5. Reduce push lever range of motion by loosening (raising) adjustment bolt.
TIP: To extend pump service life, prevent pump spring from fully compressing and impacting pump cap.
6. Lock adjustment bolt in place with nut.
7. Secure dispenser to mounting plate using holes at base. See parts diagram.
Affix lock (not included) to jug rack bracket, if desired.
TO OPERATE
1. Press push lever to dispense product.
2. Refine output volume as desired.
TO REDUCE DISPENSING VOLUME
1. Lift push lever to vertical position.
2. Loosen adjustment bolt until it rises to sufficiently reduce push lever range of motion, thus reducing chemical
usage per press.
3. To discourage tampering, lock adjustment bolt in place with nut.
976956-L • Sentinel™ 1-Gallon Locking Hand Sanitizer Dispenser
- Page 2 -
