Instructions
for use
9
Hairdryer
EN
General information:
Model SWA-001 / SWA-002
Fig.1
1) Housing
2) Heat-resistant handle
3) Power level switch
4) Air outlet
5) Air inlet
6) Power cord
7) Power plug
Operating instruction:
Prior to first use :
•
Remove the protective film and all other elements of the packaging.
•
Unwind and straighten the power cord.
Use – exploitation
Drying
•
Make sure that the device is not exposed to water, and that you are not standing on a
wet surface
•
Connect the device to a suitable outlet.
Cleaning and Maintenance
Warning! Clean the device only when it’s cold!
•
Before cleaning, always unplug the device from the power supply - unplug the power
cord.
•
Exterior of the housing can be cleaned using a soft, damp cloth. Do not use any harsh
chemicals or abrasives.
•
If the rear of the housing collects a lot of pollutants such as hair, you should take the
device to an appropriate service facility in order to have it cleaned.
•
Do not use harsh chemicals, such as detergents or solvents.
•
After cleaning, wipe the device dry.
Technical data
Model:
SWA-001 / SWA-002
Rated voltage:
AC 220-240V 50-60Hz
Max. power:
1000W / 1000W
Noise level
72 dB
2
3
4
5
1
6
7
