INSTALL OPTIONAL HOLD-DOWNS
• Lower the shade and place the pins from the hold-down brackets into the end caps on the bottom rail.
• On the mounting surface, mark the bracket hole locations.
• Check that the brackets are level and attach them to the mounting surface using two screws.
ATTACHING DECORATIVE PULLS
All pulls are shipped separately to avoid shipping damage.
All pulls are designed for a sewn hemline with a wood slat.
Pulls are not available on Season-Vue or Solar Comfort shades.
Eyelet
Factory installs in center of
hem line to attach a ring pull,
tassel, wood tassel or Urn
Cord Weight with a cord.
Hem Grip
Remove wood slat from
pocket, install hem grip,
then slide slat inside hem.
Higbee Button
Screw into the center of the
hem line through the wood
slat. Can attach a ring pull,
tassel, wood tassel or Urn
cord weight with a cord.
Ring Pull
Insert cord loop on the end
of the ring pull through
eyelet. Open cord and insert
pull through loop. Pull to
tighten. Can also attach with
a Higbee Button.
Urn Cord Weight
Insert cord through Urn and
make a knot. Tie other end
to Eyelet. When using a
Higbee Button, make a knot
in the other end and push
the pin through the knot
when attaching to the wood
slat.
Wood Tassel
Insert cord through tassel
and make a knot. Tie other
end to Eyelet. When using a
Higbee Button, make a knot
in the other end and push the
pin through the knot when at-
taching to the wood slat.
Metal Pull
Screw into center of hem
line through the wood slat.
Tassel
Insert cord loop on the
end of the tassel through
the eyelet. Open cord and
insert tassel through loop.
Pull to tighten. Can also at-
tach with a Higbee Button.
DECORATIVE ACCENTS
Decorative Accents are shipped separate to avoid shipping damage. A decorative plate with screws will be sent for
attachment to the front or back of the shade hemline.
Carpet Pull
Caterpillar Pull
Leather Pull
Charleston Pull
