Favorite Position
You will need to put a motor to sleep if you are going to program multiple shades on the same channel or adjust a limit for a
specific shade on a group channel. To wake the shade up just press and release the P1 motor head button.
Hold P1 on the motor head
for 2 continuous jogs
Putting motor to sleep
Move shade to the desired favorite position
On the backside of the wall switch
find the P2 button. Press and release
this button. The shade will jog once.
Press and release the
STOP
button on the controller
and the shade will jog
Press and release the
STOP
button on the controller
and the shade will jog
For Motorization Technical Support call 877-548-0612
