Lafayette Auto-Wand V2 Programming Instructions Download Page 4

Page: 4 / 4

Delete All Settings

Hold P1 on the motor head

for 3 continuous jogs

Favorite Position

Move shade to the desired favorite position

Hold the

STOP

button on

the wand and the shade
will jog once then release

Hold the

STOP

button on

the switch again and the
shade will jog twice.

To send the shade to your favorite position press and hold the

STOP

button until the shade starts to travel.

18-AWAND-17 3/2017

For Motorization Technical Support call 877-548-0612

Summary of Contents for Auto-Wand V2

Page 1: ...ree rechargeable easy to program and use solution to suit a large range of applications The favorite position feature allows a pre set position to be recalled for precise alignment at a desired mid wi...

Page 2: ...r DOWN on controller To reverse shade direction hold both UP and DOWN Motor Response Prior to programming Your shade should be pre programmed If you need to adjust a limit please go to that section If...

Page 3: ...ng Upper Limit You can do this at ANY position Shade does not need to be at the current upper limit Hold UP and STOP on the controller Move shade to desired position Hold UP and STOP on the controller...

Page 4: ...on Hold the STOP button on the wand and the shade will jog once then release Hold the STOP button on the switch again and the shade will jog twice To send the shade to your favorite position press and...